How to Use Coravin Pivot Aerator
1. Attach the Pivot™ Aerator to the Pivot Spout.
2. Pour with the Pivot™ Aerator
Tilt the bottle so the Aerator is over the wine glass. Lightly press Button until wine creates a gentle shower, then release. Press and release as needed to pour the desired amount. Bring the bottle upright to stop the pour.
Product Dimensions:
Height: 1.75 in / 4.4 cm
Width: 1 in / 2.5 cm
Length: 1 in / 2.5 cm
Weight: 0.05 lbs / 0.02 kg
Product Materials:
Pivot™ Aerator – elastomers, stainless steel
FAQs:
How do I attach the Aerator to a Coravin System?
Ensure that you are using the correct Aerator for your System. Simply push the Aerator on to the Spout of the Coravin System. Ensure it is tightly attached. Then, use your Coravin System as you normally would.
How do I get optimal performance from the Pivot Aerator?
Please follow these helpful tips:
– Clean the Aerator regularly.
– Use short, light presses of the Button until the wine creates a gentle shower, then release the Button.
– Press and release as needed to pour the desired amount of wine.
– CAUTION: Pressing the Button continuously can over-aerate the wine and may cause the Stopper to release while pouring.
How do I clean the Coravin Aerator?
Always rinse and dry your Coravin Aerator after each use. Over time, sediment or cork particles can build up inside the Aerator leading to performance issues. Follow these steps to clean any version of the Aerator:
(1) Unscrew the Aerator head from the rubber housing.
(2) Remove the screen from the rubber housing.
(3) Soak all three Aerator parts in warm water for a few minutes. Pay attention to the screen to make sure there are no cork particles in the holes.
(4) After soaking the Aerator parts, rinse them under running water. You may see cork particles rinse out.
(5) Once the parts are dry, put the Aerator back together by placing the screen into the rubber housing.
(6) Then screw the Aerator head tightly onto the rubber housing.
Please note:- There is no warranty for this product.
History of Coravin
Greg Lambrecht, the founder and inventor of Coravin, combined his knowledge of medical-grade needles with his passion for wine to develop a unique wine preservation system that allowed him to pour wine without removing the cork. In the late 1990s, he brought his expertise in creating ultra-gentle and exceptionally precise needles for pediatric chemotherapy delivery to his home workshop, where he began working on a device that would change the way he drank wine.
In his years of testing, Greg worked with wine makers and other experts in the wine industry to blind taste their wines using his device. They tested bottles that had been accessed 3 months, 6 months, one year, and three years previously against fresh bottles of the same wines. He continues to test Coravin Systems around the world, even testing a bottle that was 14 years old, accessed with one of his original prototypes. With every blind tasting, the results are clear: wines accessed with the Coravin Wine Preservation System remain as fresh as the day they were bottled, even years later. Today, wine professionals and wine lovers around the world enjoy wine one glass at a time using Coravin Wine Preservation Systems.
2018 CES Award Honoree – Coravin was named a 2018 CES Innovation Award honoree for its Wine Preservation System in the ‘Tech for a Better World’ category during CES Unveiled in New York.
2019 Red Dot Award for Product Design – Coravin was awarded the Red Dot Award for Product Design in 2019, recognizing Model Eleven, the first automatic and connected Wine Preservation System. The Red Dot award is one of the largest product design competitions in the world.